Pool & Spa Chemical Controllers
Learn more about Chemical Controllers
All Chemical Controllers
BECS Controllers
Chemtrol Controllers
EMEC Edge 100 Controller
- Manual - Edge 100
- Setup - Quick Start Guide
- Info - Understanding Edge 100 Setpoints
- Calibrate - How to Calibrate Edge 100 and 200 Controllers
- Calibrate - How to Perform a Full pH Probe Calibration
- Troubleshoot - Checking ORP Calibration
- Repair - How to Change a Probe
- Troubleshoot - Instrument Reset for Edge 100 & 200 Controller
Emec Edge 200 Controller
IPS Controllers
Prominent DCM200/2CL Controller
Prominent DCM 300 Controller
Prominent DCM5 Controller
Prominent 51X / Edge 500
- Manual - DCM 51X and Edge 500
- Setup - Quick Start Guide
- Setup - How to Modify/Setup the Display
- Setup - How to Program the Controller Remotely
- Setup - How to Wire Devices on Controller Relays
- Setup - How to Switch a Relay
- Info - Understanding Prominent 51X/Edge Setpoints
- Info - Understanding Prominent Edge Alarms
- Manual - CGE PPM Probe Assembly and Operating Instructions
- Maintenance - How to Change Cap and Gel on a PPM Sensor
- Data Sheet - CGE PPM Probe Technical Data Sheet
- Maintenance - Cleaning pH, ORP, and CLB3 Chlorine Probes
- Data Sheet - pH & ORP Sensor Data Sheet
- Maintenance - How to Dislodge and Clean a Flow Sensor
- Install - How to Install and Program a Flow Rate Sensor
- Install - How to Install and Program a Water Meter
- Install - How to Install and Program a DRO System
- Repair - How to Replace the USB/Micro SD Card
- Repair - What To Do When VivoPoint Marks A Body of Water as Having "Corrupt Firmware"
- Information Sheet - Prominent Turbidity Sensor
- Manual - Signet 515-2536 Rotor-X (Blue Cap) Flow Rate Sensor