Stenner Pump General Installation

Here is a video and steps on general Stenner Pump installation.

Equipment needed: Fittings and connections that come with the stenner. To include: ferrules, foot weight, and injectors, tubing long enough to go from Stenner to chemical container and Stenner to pipe with some slack.

Steps:

1. Cut tubing to proper length
2. Place connecting nut and ferrule to suction tubing
3. Install suction tubing on side of Stenner with the arrow point up
4. Finger tighten into Stenner
5. Install foot weight to opposite end of tubing and place in chemical container
6. Place connecting nut and ferrule to discharge tubing
7. Install discharge tubing on side of Stenner with arrow points down
8. Finger tighten into Stenner
9. Place connecting nut and ferrule into opposite end of tubing to go in injector
10. Finger tighten and install injector into pipe.